Tìm theo hãng

Photoelectric Beam Sensor TAKEX PXB-100ATC

Tình trạng: Còn hàng
Lượt xem: 12
(0 đánh giá)
Thông số sản phẩm
Photoelectric Beam Sensor TAKEX PXB-100ATC
Bảo hành: Từ 12 - 24 - 36 tháng (Tùy hãng)
Giá bán: 12.688.000đ
Hot Giá bán trên website là giá chưa bao gồm thuế giá trị gia tăng (VAT10%).
Hot Sản phẩm chính hãng,mới 100%.
Hot Miễn phí giao hàng và bảo hành tại nơi sử dụng trong nội thành Hà Nội, TP HCM. Với các khu vực khác, tùy từng sản phẩm mà chúng tôi có hỗ trợ miễn phí hoặc không.
Hot Thông tin sản phẩm và hình ảnh được cập nhật theo thông tin của nhà sản xuất cung cấp.
Yên Tâm Mua Sắm
• Đội ngũ kỹ thuật tư vấn chuyên sâu • Thanh toán thuận tiện • Sản phẩm 100% chính hãng • Bảo hành 1 đổi 1 tại nơi sử dụng • Giá cạnh tranh nhất thị trường
Liên Hệ Với Kinh Doanh Online

Đánh giá sản phẩm Photoelectric Beam Sensor TAKEX PXB-100ATC

Photoelectric Beam Sensor TAKEX PXB-100ATC

- Upper and lower beams individually detect objects.

- The alarm output can be selected OR-gate (blocking either upper or lower beam) or AND-gate (blocking both upper or lower beam) according as a site.

Feature

- Anti-Crawl Detection: Upper and lower beam individually detects the objects and issues a signal only by blocking each beam.

- At . Hf Separate Output

   + AT output: OR-gated by upper and lower beam.

   + HF output: AND-gated.

- Synchronized High Power Beam: By synchronizing the timing of transmitting and receiving beam, the stacking system will be more reliable.

- Double Modulation

   + Double modulated beams are designed to distinguish the true beam signal from accidental or deliberate interference from sunlight, car headlights and other artificial light sources.

   + This increases the reliability in the outdoor security system.

- Quad High Power Beam

   + The beam power is 100 times of the minimum requirement.

   + The beam distance is 10 times of the described specification.

   + This high power beam also realizes the reliability against the harsh conditions like fog, snow, heavy rain.

- Ecology: RoHS adapted - Environment friendly. Free from Lead, Mercury, Cadmium, Hexavalent chromium, Polybrominated biphenyl, Polybrominated diphenyl ether.

- Insect/Water Prevent: IP65 rated, with anti-insect bushing and special wading.

- Anti-Bird Spike: Keeps birds and small animals away from the sensor, helping to reduce false alarms.

- Drip-Proof Housing: Prevents rain and snow from streaming down the front side of housing, helping to avoid false alarm.

- Dual Ring Sight: Enables better and clear view for easy beam alignment.

- Target Color

   + The vivid color of the internal structure can be recognized easily from the far end in the beam alignment procedure.

   + The color differs between a transmitter and a receiver which helps easy installation and checking.

- Increased Range Adjustment Allowance

   + Vertically ±20°compared with previous version.

   + It may adapt to the slope installation flexibly.

- Wireless Alignment Checker: Enables easy and accurate beam alignment.(Sold separately).

- Lightning Protection

   + Minimizes the damage caused by induced lightning through wiring.

   + Rated up to 10,000V under normal mode and 15,000V under common mode.

Specification

Model PXB-100ATC
Detection system Near infrared pulsed beam interruption system
(Anti-crawling, Anti-corrosion)
Infrared beam Double modulation pulsed beam by LED
Protection distance Outdoor 330' (100m) or less
Response time AT output : 0.05sec by upper/lower level simultaneous interruption 0.1/0.2/0.3/0.5sec by either level interruption
HF output : 0.05sec by upper/lower level simultaneous interruption
Power supply 12 to 30V DC (Non-polarity)
Current consumption Transmitter: 27mA Receiver: 48mA
Alarm output Dry contact relay output N.O./N.C. selectable
Contact action: Interruption time (Min.2sec.)
Contact capacity: 30V (AC/DC) 0.25A (resistive load)
Protective resistor
Environmental output Dry contact relay output N.O./N.C. selectable
Action: Activated when weather condition gets worse (Min.5sec.)
Contact capacity: 30V (AC/DC) 0.25A (resistive load)
Protective resistor
Tamper output Dry contact (N.C.)
Action: Activated when cover is detached
Contact capacity: 30V (AC/DC) 0.1A (resistive load)
Protective resistor
Alarm LED Red LED (Receiver) ON: when an alarm is initiated
Attenuation LED Red LED (Receiver) ON: when beam is attenuated
Ambient temperature range -31゚F to +151゚F(-35 to +66℃)
Beam adjustment Horizontal: ±90°, Vertical: ± 20°
Functions Modulated beam frequency selection,Tone indicator, Environmental module, Beam power selection, Transmitting power adjutment, Programmed AGC, Auto-gain lock function, Monitor Jack, Tamper, Response time adjustment, Upper/lower beam switch Wireless checker
Mounting positions Outdoor, Indoor
IP rating 65
Wiring Terminals
Weight Transmitter : 49oz (1,400g) Receiver : 52.5oz (1,500g)
Appearance PC resin (wine red)

- Bảo hành: 12 tháng.

Đánh giá nhận xét

5
rate
0 Đánh giá
  • 5
    0 Đánh giá
  • 4
    0 Đánh giá
  • 3
    0 Đánh giá
  • 2
    0 Đánh giá
  • 1
    0 Đánh giá
Chọn đánh giá của bạn
Quá tuyệt vời
CAPTCHA code
Tổng Đài Hỗ Trợ 0904937368
Fanpage
Youtube
Danh Sách Ngân Hàng Thanh Toán Online

CÔNG TY TNHH TƯ VẤN PHÁT TRIỂN CÔNG NGHỆ CST VIỆT NAM

ADD : Số 14 Ngõ 138/245 Định Công – Phường Định Công - Quận Hoàng Mai - Hà Nội
Điện thoại: 024.85872879 - Fax: (+84.4) 35641453

Email: sales@cameraquansatcctv.com.vn

http://cameraquansatcctv.com.vn

HotLine : 024.85872879 / 0904937368


Chat hỗ trợ
Chat ngay
0904937368