Cảm biến lửa TAKEX FP-5500E
- High sensitivity ultraviolet flame sensor + wide angle intrusion PIR.
- Dual output modes; AND/OR.
- Forced output operation following continued flame detection.
- Sensitivity adjustment.
- Alarm memory function.
- Detection timer.
Specification
| Flame sensor |
| Detection system |
Ultraviolet rays (Detection wave length 185 to 260nm) |
| Detection distance |
15m: 15cm flame on 4cm square pan in front
10m: 7cm lighter flame in front |
| Detection area angle |
Approx. 120° conically |
| Detection setting |
Detection timer: 4steps (1sec, 3sec, 6sec, 15sec)
Detection sensitivity: (H [100%], L [50%])
*Selectable only in 'AND' mode
(Fixed to H [100%] in 'AND' mode |
| Alarm LED (RED) |
Inside front window
- Lighting at alarm
(Detection time + off delay. Approx. 2 sec.)
*Blinking (3 min)/Lighting (47 min) at memory |
| Passive sensor |
| Detection system |
Passive infrared |
| Detection area angle |
Wide Angle 15m Max |
| Sensitivity setting |
4 steps (100%, 80%, 50%, 20%) |
| Alarm LED (RED) |
Inside front window
- Lighting at alarm
(Detection time + off delay. Approx. 2 sec.)
*Blinking (3 min)/Lighting (47 min) at memory |
| Alarm output |
| Contact operation |
- AND mode
+ When flame sensor detects twice within set “AND” timer,
(Detection time after 2nd detection + o delay. Approx. 2 sec.) or
+ When flame sensor detects for “Flame duration time”
(Detection time after 30/60 sec + o delay. Approx. 2 sec.)
- Individual mode
+ When flame sensor detects (Detection time + off delay. Approx. 2 sec.) |
| Contact method |
Dry contact relay (Semi-Conductor) (N.C./N.O. selectable) |
| Contact capacity |
30V (AC/DC) 0.25A Max. (resistive load) |
| Alarm output |
| Contact operation |
AND mode
+ When both flame and passive sensor detect within set “AND” timer
(Detection time (2 sec Min.)
Individual mode
+ When passive sensor detects (One shot. Approx. 2 sec) |
| Contact method |
Dry contact relay (Semi-Conductor) (N.C./N.O. selectable) |
| Contact capacity |
30V (AC/DC) 0.25A Max. (resistive load) |
| General |
| Power supply |
10V to 30VDC (non-polarity) |
| Power consunmption |
25mA Max. |
| Alarm memory |
Reset after blinking (3 min) and lighting (47 min)
(Operative individually with flame and passive sensors)
* No indication when Alarm LED is off |
| Ambient temperature range |
-20°C to + 50°C (-4°F to + 122°F)
without condensation and freeze |
| Mounting position |
Indoor/outdoor (IP43) |
| Connections |
Lead wire (Cord length: 0.5m) (6 cores: 2×power, 4×alarm) |
| Weight |
Approx. 550g (including flange) |
| Appearance |
Body: Resin (Black) |
- Bảo hành: 12 tháng.
0904937368 Sale- 1 HỖ TRỢ KỸ THUẬT
